Caldwell Roller-Tilt Constant Force Balance Installation Instructions
PLEASE NOTE: These instructions work with Single, Tandem or Triple Constant Force Balances
Installing a Caldwell Roller Tilt Constant Force Balance (such as our 31 Series or 32 Series Constant Force Balances) requires careful attention to detail to ensure proper operation and long-term functionality. These balances are commonly used in double-hung windows. Follow these installation instructions step by step:
Materials and Tools Needed:
- Caldwell Roller Tilt Constant Force Balance
- Screwdriver
- Pliers
- Measuring tape
- Safety glasses
Jamb Cut Out Specifications:
text
Installation Steps:
1. Start by measuring the height and width of the window opening where you plan to install the balance. Record these measurements for reference.
2. Ensure that you have chosen the correct Caldwell Roller Tilt Constant Force Balance based on the weight and dimensions of your window sash. Refer to the manufacturer's guidelines or consult with a professional if you're unsure.
3. Wear safety glasses to protect your eyes during the installation process.
4. To access the balance, you will more than likely need to remove the window sash. Most sashes can be removed by tilting them inwards and lifting them out of the frame. Use caution as some sashes can be heavy.
5. In some cases, there may already be an existing balance or pocket in the window frame. If so, locate it and remove any coverings or trim that may be concealing it.
6. If there is an old or damaged balance in place, carefully remove it using a screwdriver or pliers. Be cautious not to damage the window frame or sash.
7. Slide the new balance into the jamb pocket and place in the mounting location.
8. Secure the balance in place using the bracket and screws.
9. Ensure that the balance is level and securely fastened.
10. If the sash was removed, reattach it to the balance. Align the sash with the balance and put the pivot bars back into the coil balance.
11. Carefully push the sash down slightly to ensure the window is level, then push the sash back into the jamb. Next, gently raise and lower the window sash to ensure that the sash is mounted properly and that the balance operates smoothly. If you had to remove any trim or coverings to access the balance, replace them securely.
12. Double-check that the window operates smoothly and that the balance is securely installed.
Conclusion
Your Caldwell Roller Tilt Constant Force Balance should now be properly installed, and your window should operate smoothly. If you encounter any issues or if the window does not operate correctly, feel free to contact the WHD Team! Our team of experts will be more than happy to assist you.